Responsive Ads Here


Upgrade Radio WiFi Dlink DWL 2100 AP

Setelah 2 hari otak atik radio wifi tipe Dlink DWL 2100AP dirumah yang gak mau fungsi pada mode repeater, akhirnya tadi pagi nekat di upgrade firmware dari versi 2.30eu ke 2.40eu walhasil maknyussss... mode repeater berfungsi normal kembali...

Gara-gara ingin coba nembak wifi ke rumah adik, radio Dlink yang sebelumnya berfungsi sebagai client (dulunya pernah dipakai repeater juga) coba diubah ke mode repeater tapi selalu hasilnya gak bisa konek ke Akses Point utama. Udah dirasat-reset hasilna sama aja, masa harus ganti radio pake Minitar yang wa cadangin. Akhirnya dari pada capek ngerjain tiang wa coba cari firmwarenya di site Dlink Support eh ternyata ada versi barunnya, langsung aja sedoot trus nekat di upgrade. Awalnya pake opera dan gagal terus saat upgrade, untung gak bikin rusak, akhirnya coba pake Internet Explorer dan berhasil... weleh senangnya, apalagi ketika ditest ke mode repeater langsung konek plus fiturnya bertambah. Hehehe... sekarang radio Dlink DWL 2100AP wa segar kembali plus banyak bug yg di perbaiki... I Love My Dlink DWL 2100 AP

DWL-2100 eu Firmware v2.40 Release Note
Problems Resolved:
1. [DVIEW] When MSSID+WDS enabled, the authentication settings of MSSID should be changed followed by Primary’s setting.
2. [FW] Fix the output power issue.
3. [Firmware]SSH still could login in with old username/password, when web login username and password modified.
4. [Firmware]SSH socket still receive packet and then run out of memory even ssh is disabled.
5. [WEB] UpdateFirmware page will show wrong in 1280*1024 display mode.
6. Remove open/share key authentication for Universe Repeater.
7. [APM]can not get trap srvip .
8. [APM]Web can not get multi setting if set WDS+MULTI use APM.
9. The IOT issue, If enable the superG and WMM, some wireless card can not communicate with the AP when the Authentication is WPA and Cipher type is TKIP.
10. Change the Universe Repeater Mac address rule, If root AP's BSSID is ii:jj:kk:ll:mm:nn, Universal repeater's MAC is uu:vv:ww:tt:oo:pp. Modify Universal repeater's BSSID as 00:pp:kk:ll:mm:nn.
11. [WEB] When the login password is not blank, and user changes other settings in the same page, it will pop up a password error message in Tools\Admin page.
12. Do not support Several traps info for APM.
13. RSTP do not take effect for WDS mode
14. There is some issue for WDS+MSSID , as authentication:wpa/wpa2-psk,cipher:auto.
15. Two stations connected to secondary ssid through MSSID+wds could not ping each other.
16. Multipacket rate control could not work normal.
17. the multicast packet control issue,when multicast packets is too many, stations could not ping to the AP
18. Multi-SSID stable problem: when enable Multi-SSID, AP will stop working after several days;
19. [WEB]When user login with wrong user/password, they still can access some web pages;
20. Close the function auto save the configuration to the flash.
21. Delete some useless log messages of deauthentications.

1. Add Data Rate Control function
2. Add Universal Repeater
3. Add MSSID + WDS.

Download Link untuk firmware Dlink 2100AP versi 2.30eu dan 2.40eu
Dlink DWL2100AP Firmware

New !!! Versi 2.50eu (change log include)
Dlink DWL2100AP Firmware

Firmware: v2.50
Hardware: A4
Date: 08/10/28

Problems Resolved:
1. [FW] AP can't send standard traps.
2. [FW] rogue ap list should not be shown if band is not selected.
3. [APM] rogue ap list shows wrong.
4. [WEB] It can't reset data rate settings
5. [FW] The trap status and server ip can not be set.
6. [FW] When AP mode is wds with ap, there is a lack of some logs on Syslog.
7. [FW] use the wizard to configure the AP ,and set the password empty, then restart AP. the username will be changed from admin to empty
8. [FW] Something wrong with the help document
9. [FW] There is no image but update success by tftp.
10. [FW] Intel WiFi Link 4965AGN can’t connect to AP if authentication is WPA/WPA2 PSK, and vlan state is enabled.

1. [FW] Modify GUI "11g only disable/enable" to "Wireless B/G Mode Mixed/11b only/11g only" default value will be "Mixed", support CLI command.
2. [FW] Support primary SSID with VLAN tag function.
3. [FW] Support administration VLAN(Manage VLAN) , administrate AP with WLAN and management IP range function.
4. [FW] Support WMM over WDS function.
5. [FW] Support IGMP Snooping (v1/v2) function.
6. [FW] Data Rate Control follows Dlink new spec.
7. [FW] Support IAPP (fast roaming)
8. [FW] Support Secondary RADIUS server setting
9. [FW] Enable/Disable ping to AP
10. [FW] Support Acct-Interim-Interval attribute for Accounting function,
11. [FW] Trap server, settings(categorize the types of traps)
12. AP status on UI
a) CPU and Memory utilization
b) Statistics for Ethernet TX and RX,bytes and packets
13. [CLI] CLI command to input SNMP Location.
14. [CLI] Hide the commands, get targetPower/gett controlPower/get swPower ,in CLI
15. [CLI]Open 3 RSTP commands, rstp getstp/rstp getstate/rstp setstate


Free Rapid Downloader

For U who often get file from rapidshare, etc with free account, now u can download it easily with this tool, enjoy ...

Main Features
*support for concurrent downloading from multiple services
*downloading using proxy list
*download history
*smart clipboard monitoring
*automatic checking for file's existence on server
*auto shutdown options
*automatic plugins updates
*simple CAPTCHA recognition
*works on MS Windows, Linux and MacOS
*easy to use
*multilanguage interface - Arabic, Bosnian, Brazilian portuguese, Croatian, Chinese, Czech, Danish, Dutch, English, Farsi, French, German, Greek, Hungarian, Indonesian, Italian, Japanese, Polish, Russian, Slovak, Slovenian, Spanish, Turkish and Ukrainian is ready for you!
looks amazingly

simply works!

Currently supported services are: (+ premium) and (+full) free (+profi) (video) (video) (video) (crypter) (crypter) (crypter) (crypter) (crypter) (crypter)
* ...others are coming

Homepage :

Download Link :
Free Rapid Downloader 0.81 (older)

Update Link :
Free Rapid Downloader 0.82 (new)

Alternative Use Rapid Hacker 4.2

Download Link :
Rapid Hacker 4.2 (848Kb)